e produce a brick finish unlike any typical finish done on precast concrete structures or products. In order to achieve a realistic brick finish, a grid work is floated into the top surface of the panel in the form. The grid produces a sharp edge impression that closely resembles brick with recessed mortar joints.

Using a long life, UV resistant, deep penetrating concrete stain and a short nap roller, we produce an attractive and maintenance-free finish.

Most producers, if they produce a brick finish at all, use a form-liner on the “down” side of the panel in the form. Due to the tapers required on formliners to allow stripping the panel off the form, the finished brick impression can appear washed out with no sharp edges on brick pattern and allow stain to flow into mortar joints destroying the realism of the finish.